Transmission Line Differential Protection Based on Microprocessor Relays

Saeed Roostaee, Mini Shaji Thomas, shbana mehfuz

Abstract


Nowadays, in digital substation, lots of new technologies such as microprocessor relays and communication technology bring lot of advantages for protection functions. Differential protection plays a very important role because of absolute selectivity for isolating the faulty part. This paper reviews transmission line differential protection based on microprocessor relays.

Full Text:

PDF

References


Sinclair, A., Finney, D., Martin, D., & Sharma, P. (2014). Distance protection in distribution systems: How it assists with integrating distributed resources. IEEE Transactions on Industry Applications, 50(3), 2186-2196.

Hashemi, S. M., Hagh, M. T., & Seyedi, H. (2014). A novel backup distance protection scheme for series-compensated transmission lines. IEEE Transactions on Power Delivery, 29(2), 699-707.

Mukerjee, R. N., & Abdullah, M. F. B. (2008). Under-reach correction in twin circuits without residual current input from the parallel line. IEEE Transactions on Power Delivery, 23(3), 1359-1365.

Ma, J., Pei, X., Ma, W., & Wang, Z. (2015). A New Transmission Line Pilot Differential Protection Principle Using Virtual Impedance of Fault Component. Canadian Journal of Electrical and Computer Engineering, 38(1), 37-44.

Ingram, D. M., Schaub, P., Taylor, R. R., & Campbell, D. A. (2014). System-Level Tests of Transformer Differential Protection Using an IEC 61850 Process Bus. IEEE Transactions on Power Delivery, 29(3), 1382-1389.

Shoaib, M., & Vanfretti, L. (2013, January). Performance evaluation of protection functions for IEC 61850-9-2 process bus using real-time hardware-in-the-loop simulation approach. In Electricity Distribution (CIRED 2013), 22nd International Conference and Exhibition on (pp. 1-4). IET.

Wen, M., Chen, D., & Yin, X. (2012). Instantaneous value and equal transfer processes-based current differential protection for long transmission lines. IEEE Transactions on Power Delivery, 27(1), 289-299.

Liu, Y., Gao, H., Gao, W., Li, N., & Xiang, M. (2011, September). A design scheme of line current differential protection based on IEC61850. In Power Engineering and Automation Conference (PEAM), 2011 IEEE (Vol. 2, pp. 520-523). IEEE.

Dambhare, S., Soman, S. A., & Chandorkar, M. C. (2009). Adaptive current differential protection schemes for transmission-line protection. IEEE Transactions on Power Delivery, 24(4), 1832-1841.

Wang, Y., Yin, X., You, D., Xu, T., & Xiang, H. (2008, April). Development of wide area current differential protection IED based on IEC 61850. In 2008 IEEE/PES Transmission and Distribution Conference and Exposition (pp. 1-9). IEEE.

Kase, T., Kurosawa, Y., & Amo, H. (2008). Charging current compensation for distance protection. IEEE Transactions on power delivery, 23(1), 124-131.




DOI: http://dx.doi.org/10.1000/ijses.v0i0.111

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 International Journal Series in Engineering Science (IJSES) (ISSN: 2455-3328)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.